Installing tiles on your bathroom walls is a great way to give your bathroom a stylish, professional look. Although it can seem daunting at first, if you have the right tools and know-how it can be a relatively straightforward project. Here’s quick overview on tiles installation process:
1. Measure your walls and purchase the right amount of tile. Make sure you also buy grout, adhesive, and any other supplies you will need.
2. Clean the walls thoroughly and make sure they are flat and level.
3. Spread adhesive on the wall in small sections and begin installing the tiles. Use spacers to maintain even grout lines.
4. Once all the tiles have been installed, mix the grout and spread it over the tiles using a rubber float. Wipe away the excess with a damp sponge.
5. Allow the grout to dry for the recommended time before applying any sealant.
Follow these steps and you’ll be well on your way to having beautiful tiled walls in your bathroom.
- Minimum Materials and Tools Required
- Step 1: Fill Large bucket of water and submerge bathroom wall Ceramic Tiles
- Step 2: Applying grout mixed with water on back of tiles
- Step 3. Start Placing tiles from Edge of the wall.
- Step 4: Measuring & Cutting Hole in Tiles for Pipe Outlets
- Step 5: Finishing Touch
- Related Articles:
Minimum Materials and Tools Required
Materials
- Grout
- Water
- Tiles Adhesive
- Sealant
- Tiles – Buy Online At Affordable Rate | Download Catalogue
Tools
- Tiles Cutter or Wet tiles saw
- Hole Saw Diamond Drill Bit Hollow Core Drill Bit Set for Diamond Coating
- Bucket
- Layout Tool for Handymen, Builders, Craftsmen.
- Safety goggles and gloves.
Before you start, make sure you have Clean and level the wall surface where the tiles will be installed. Ensure that it is free of dirt, dust, and other debris. Fill any holes or cracks with a suitable filler. Measure the area to be tiled and determine the number of tiles required. Use a measuring tape and pencil to mark the center point of the wall and snap a chalk line to use as a reference for laying out the tiles.
Step 1: Fill Large bucket of water and submerge bathroom wall Ceramic Tiles
You might be wondering – Why need to soak tiles in water. Ceramic tiles are porous when compared to porcelain tiles.
Traditionally, these tiles were held together with cement-mortar. You are aware that mortar setting is a chemical reaction that requires water (which is present in the cement-sand mortar mixture). Highly absorbent tiles can’suck’ the water out of your mortar that was necessary for the setting reaction. So, give the tiles their fair share of water before they steal it from the mortar! Furthermore, the water in the tile will provide adequate moisture after installation, as cement mortar mix is not a quick fix! It grows more powerful over time.
What about porcelain / vitrified tiles, which have a negligible water absorption? When you can’t even get a horse to drink water, there’s no point in soaking the vitrified tiles (WA0.5% by weight)! They do not have a thirst.
Step 2: Applying grout mixed with water on back of tiles
Follow the manufacturer’s instructions for mixing the grout with water. Apply the grout mixture to the wall using a notched trowel, spreading it evenly in a thin layer.
Step 3. Start Placing tiles from Edge of the wall.
When it comes to laying a tile floor, one of the most common questions many homeowners have is where to begin the layout. The tiles can theoretically be laid down in any area of the room, but starting in corners, for example, rarely results in a balanced installation. Some tile installations, such as diagonal tile patterns, are best started in the centre of the room. In other cases, however, you would select a different starting point.
Check out Different Types of Tiling Layout -> Click Here to read Blog
Step 4: Measuring & Cutting Hole in Tiles for Pipe Outlets
If you need to cut tiles to fit around outlets, corners, or edges, use a tile cutter or tile saw to make the cuts.
Step 5: Finishing Touch
Once the adhesive has set, remove the tile spacers and fill the joints between the tiles with grout. Use a grout float to spread the grout evenly and wipe away excess with a damp sponge. And once the grout has dried, use a grout sealer to protect it from moisture and stains. If necessary, use silicone caulk to seal around bathtub, shower, or sink. Clean the tiles and grout with a damp sponge. Allow everything to dry completely before using the bathroom. Resource : Click Here
Note: This guide is a general overview of the tile installation process. Always follow the specific instructions provided by the tile and adhesive manufacturers for best results. You can also ask for local tiles installer to install it for you!
That’s it! Your newly installed tiles will give your bathroom a fresh and clean look. Regular cleaning and maintenance will help keep them looking great for years to come.
